Search

Amal Norton. Es2. M18. Carburettor. 1 1/16" 1937-54.Through draft: 1 1/16" (internal front to back) = 26,98 mmClip Fittting 1 1/4" = 31,75 mmMain Jet 160Needle Jet 106Valve slide 4

Made in EnglandAJS Mod. 2/ Matchless Mod. X  Mainjet 130  Valve Slide 3 or 4, Needle Jet 106Matchless Mod. X Brough Superior SS80this can be jetted as per your requestPlease look at all pictures

Petrol Tap BSA with Filter and Spigot  3/8"- 7/16" 3/8"OD: 16,662mmID/Core DM: 14,950mm19TPI   

Norton/Triumph Plain Washer 5/16" 10 pieces

602321.01-8316

Clutch Roller 3/16" OD: 3/16" (4.8 mm)
L: little under 3/16" 4.6 mm
BSA/Triumph Kupplung
BSA/Triumph Clutch
TR25, B25ss. 
C15, B40, B44, B50.Ariel 141-36, (24) gear change

BSA Goldstar Petrol Tap 1/8" x 7/16".  BSA Goldstar Petrol Tap 1/8" x 7/16" with spigot and nut

1/8"BSP= 9-9.6mm, 28TPI
7/16"BSP= 9.7-10.9mm, 19TPIsuitable 1/8" fibre washer 70-0402 

Norton Gearbox Inner Cover Stud
5/16" x 1 5/8"
5/16" x 22TPI BSF
5/16" x 26TPI BSC/CEI
fitting nut Art.Nr.: NB225
fitting washer Art.Nr.: NB99

Made in England

John Bull Handlebar Rubber 1 1/16" - 27 mm x 110 mm

1 1/16" (=27mm), open end
L: 110 mm
  This is only 1 piece, not a pair

John Bull Handlebar Rubber No 12. 1 1/16" - 27 mm x 140 mm

1 1/16" (=27mm), open end
L: 140 mm
  this is only 1 piece, not a pair

4 Lobe BSA B31,B32,B33,B34,
Gold Star.
M20.M21.M33
BSA C10.C11 1949-53
16T.
New
110-046
428 chain
1/2x5/16"
Made in England

Norton Primary Chaincase Gasket Rubber Norton Dominator 88SS,650SS,650/99. ES2. 16H. Mod. 18. 19S. Big Four. Atlas 19R. Mercury. Mod.7. Mod 88. Mod. 99.
15/16" - 23.7mm wide
Thickness: 9 mm

Circumference: 118 cm


Norton Chaincase Band Rubber
Single and Twin Cylinder Mod.
Dominator etc.
with alternator electrical system-larger chaincase than dynamo Mod.

Norton Front Footrest Axle 16 H. Big4. M19.M18. Es2. M50
New, old stock
7/16" 20 TPI x 333mm. = 13.1/8"
fits Pre war, War and Post War Mod. Rigid.

Carburettor Flange Gasket Amal insulating 1 3/16"/30mm x 1/16"/0.8mm

Gearbox Sprocket AMC, Norton 20T.
Norton 16H, ES2, Mod.18,
Big Four, 7, 77, 88, M50, 40, 30, Dominator
Fits Chain Size 110-054 (520) 5/8" x 1/4"
TOTAL width: 13 mm
Inside diameters: : 31.8mm / 29mm
For Dolls Head Gearbox

BSA Nut 5/16" x 26 TPI Various
thin walled nut
Bar End turned Nut, not a pressed nut
high quality
1/4" deep
OD: 7/16
Spanner Size 3/16 WW

Show Type Nut Brough Superior
5/16" BSF 22 TPI.
Spanner Size 1/4" WW.
9/16" Tall.
slight dome

High Gear Needle Roller Bearing Triumh T140/T150/T160
5 Speed

OD: 1 1/16" - 27mm
ID: 21mm
Width: 22mm

BSA Cylinder Base Stud A65
1.3/4" x 3/8" 24TPI UNF/16TPI UNC 3/8" UNF to UNC 1.11/16"

Made in England

Triumph Rear Wheel Axle Nut 500/650cc. 1942-on. 11/16" x 20Tpi UNEF 9/16" Spanner Deep,Thick 12.8mm

5T Speed Twin
6T Thunderbird
TR5 Trophy
T100 Tiger 100

Vincent Plain Nut 7/16". 26TPI. LHT
Stainless Steel
Spanner Size 5/16"

Made in England by Vincent Motorycle

Vincent Plain Nut 7/16"CEI thin Wall
stainless steel

Spanner Size 5/16"


Made in England by Vincent Motorycle

Spring Holder f. Frame 13/16"
13/16" in decompressed condition

Bolt 1/4" x 7/16"UH x 26TPI BSC
Spanner Size 3/16"WW

slidely domned Head
also for Mudguard fitting
Made in England

Velocette Rubery Owen Bolt 1.9/16" x 1/4" 20TPI WW
Spanner Size 3/16"WW
Made in England by Velocette Ltd.
MSS
Viper
Venom
Clubman 350cc (MKI and MKII)
Scrambler 350cc
Clubman 500cc (MKI and MKII)
Scrambler 500cc
Thruxton
Endurance

Velocette Bolt 3/8" BSC/CEI 26TPI x 1 1/16"UH
Spanner Size 5/16"WW

Made in England by Velocette Ltd.

MSS
Viper
Venom
Clubman 350cc (MKI and MKII)
Scrambler 350cc
Clubman 500cc (MKI and MKII)
Scrambler 500cc
Thruxton
Endurance

Velocette Rubery Owen Bolt 1/4" x 1 1/2" 26TPI BSC/BSF
Spanner Size 3/16"WW
MSS
Viper
Venom
Clubman 350cc (MKI and MKII)
Scrambler 350cc
Clubman 500cc (MKI and MKII)
Scrambler 500cc
Thruxton
Endurance