Search

BSA A10 Conrod, Swinging Arm /used

This is an BSA A10 Conrods, small bearing crank.
These are not A7 and these are NOT big journal
distance between centers: 16.5 cm
small end bush size 19 mm
Area to take the shells is 40.5 mm

For restoration - No warranty

Top Yoke used. Triumph.

no warranty - for restoration Measurement middle – middle 165.1 mm = 6 1/2“ Hole diam.  1 ¼“    ca 33 mm Stem diameter is 25,4 mm = 1“ Length of stem:  200 mm = 7.9 „

Brough Superior Valve Cap Firecone Cooling Tower 5 Ribs
fully machined
2 pieces
m
16 TPI
OD Thread 50 mm

Norton Oil Tank Cap/Dipstick and Gasket(06.1649)

Triumph 3HW Piston Ring Set / Piston Rings +040
for 71mm piston
Hight 1,6 mm/ 3,2 mm =
Compr. Ring 1/16"
Oil ring 1/8"

Gandini

AJS Workshop Maintenance Manual Book 1960, Copy, 24 Pages
350c.c. Single Cylinder Models 500c.c
500c.c Twin Cylinder Models 650c.c.

350 Model 16 Touring Single
350 Model 16C Trials Single
500 Model 18 Touring Single
500 Model 18CS Moto-Cross Single
500 Model 20 Touring Twin, A-C Generator
650 Model 31 Touring Twin, A-C Generator
650 Model 31 Deluxe Touring Twin, Magneto
650 Model 31CS Moto-Cross Twin
650 Model 31CSR Sports Twin

Norton Washer
NM16947 H12/16947

Norton Felt Washer Steel Cup NOS
OD: 32.6mm
ID: 16.8mm
H: 6.4mm New, old stock

Vincent Piston Ring Set / Piston Rings STD
for Comet, Meteor, 500cc compression  rings:  Thickness 1,61 mm / 1/16"  / 0.065" Depth: 3,56 mm - just over 1/8" / 0.145" oil ring: Thickness: 3.97 mm/ 5/32" thick / 0.158" Depth 3,56 mm - just over 1/8" / 0.145" End to end gap = 0,5 mm    

Vincent Piston Ring Set / Piston Rings +020. Comet, Meteor 500cc compression  rings:  Thickness 1,61 mm / 1/16"  / 0.065" Depth: 3,56 mm - just over 1/8" / 0.145" oil ring: Thickness: 3.97 mm/ 5/32" thick / 0.158" Depth 3,56 mm - just over 1/8" / 0.145" End to end gap = 0,5 mm

Vincent Piston Ring Set / Piston Rings +040. Comet, Meteor 500cc compression  rings:  Thickness 1,61 mm / 1/16"  / 0.065" Depth: 3,56 mm - just over 1/8" / 0.145" oil ring: Thickness: 3.97 mm/ 5/32" thick / 0.158" Depth 3,56 mm - just over 1/8" / 0.145" End to end gap = 0,5 mm  

Vincent Piston Ring Set / Piston Rings STD 1000cc, Rapide, Black Lightning, Black Shadow   compression  rings:  Thickness 1,61 mm / 1/16"  / 0.065" Depth: 3,56 mm - just over 1/8" / 0.145" oil ring: Thickness: 3.97 mm/ 5/32" thick / 0.158" Depth 3,56 mm - just over 1/8" / 0.145" End to end gap = 0,5 mm

Vincent Piston Ring Set / Piston Rings +020 1000cc, Rapide, Black Lightning, Black Shadow compression  rings:  Thickness 1,61 mm / 1/16"  / 0.065" Depth: 3,56 mm - just over 1/8" / 0.145" oil ring: Thickness: 3.97 mm/ 5/32" thick / 0.158" Depth 3,56 mm - just over 1/8" / 0.145" End to end gap = 0,5 mm

Vincent Piston Ring Set / Piston Rings +040 1000cc, Rapide, Black Lightning, Black Shadow compression  rings:  Thickness 1,61 mm / 1/16"  / 0.065" Depth: 3,56 mm - just over 1/8" / 0.145" oil ring: Thickness: 3.97 mm/ 5/32" thick / 0.158" Depth 3,56 mm - just over 1/8" / 0.145" End to end gap = 0,5 mm

Cylinder Block Scott no cracks found 68.14 mm bore. circa. Ports. 24.4 x 52mm    16.7 x 52mm for restoration - no warranty Please look at all pictures

BSA C15 Hub Dust Cover AD: 42,2mm ID: 16,8mm Width: 7mm Please see all pictures

AJS/Matchless Piston +20
STD= 69mm +020 = 69,5 mm
Piston Clearence 0.12mm or 45thou
with Circlips

OHV
Model: 16, 16M, 26, 26SS, 26T, Silver Streak, Single and 2 port

Petrol Tap with Filter/sifter 3/8"

Petrol tap fitted with std. corks. Included are 2 gasket washers suitable for modern petrol.

Filter End:
3/8 BSP / 19TPI
Thread inside: 14,95mm
Thread outside: 16.62mm

Pipe end:
1/4 BSP / 19 TPI
Thread inside: 11,44mm
Thread outside: 13,15mm

BSA Clutch Cable
250cc
C10/C11/C11G
1946-55
3- speed
BSA C11 1949

Inner: 116,5cm
Outer: 106,5cm

f. MO1 Magnetos. 6V. Replacement for Lucas

40/48W

Total Length: 165 mm
original fitment for WD Triumph, BSA M20, 16H Norton
Please note: this is for a Dynamo that has 1 bolt holding the field coil on.
 

Petrol Tap 3/8" BSP: 1/4"
without sifter3/8"ID: 16,62 mmAD / Core DM: 14,95 mmTPI 19
Petrol tap fitted with std. corks. Included are 2 gasket washers suitable for modern petrol.1/4"OD: 13.157mmID / Core DM: 11,445mm19 TPI 

Petrol Taps with Banjos and Dome Nuts 3/8"/SetOD: 16,662mmID/ Core: 14,950mm19 TPI BSP
 

Clutch Springs Burman /Set 4 Pieces
L: 40mm
OD: 16,8mm
ID: 12,8 mm
Thread Diameter: 2mm

Clutch Spring Burman

L: 40mm
OD: 16,8mm
ID: 12,8 mm
Thread Diameter: 2mm

Price per pair, fits most BSA from 1946-1961 BSA A65  1970
some B25, B40 and B44 front Half Width Hub
Bsa A7, front and rear Half Width Hub
A10, Only Rear Half Width Hub
B31, Only Front Half Width Hub
B32, front and rear 7"
B33, onyl rear half width hub
B34, Gold Star, M20,M21,
M33,A65L only rear half width hub
BSA B44 Victor, Goldstar 1950-1963, A10 1954-1956, A65 1965-1970, B25-TR25 1967-1970
A7. A10 rear Full width hub 1957-66
replaces the following numbers:
68-5516.66-5515 Please note, these does not replace all mod. Measurements need to be checked first. 7" Please look at all pictures